Building an Elevated Bed (off the ground) Part 2 of 3

Safety Tip: Always wear safety glasses when working with tools that could make something “fly” around. That actually means anytime your are using tools whether hand or power. You only have one set of eyes, protect them. Next cut 5 pieces of 2×2, 36 inches long. Be sure to clamp the 2×2 to the box before you cut. This is much easier than holding it and much safer even if you are using a handsaw. These will be cross supports for the box. Next we will cut the legs. Treated Read More …

Building an Elevated Bed (off the ground) Part 3 of 3

Safety Tip: Always wear safety glasses when working with tools that could make something “fly” around. That actually means anytime your are using tools whether hand or power. You only have one set of eyes, protect them. Next finish setting the 2×2 attached to the ends of the box. Drill three pilot holes on each end of the box into the 2×2. One in the center and approximately 1/3 of the way to each end. Complete the attachment by fastening with 3″ screws through each pilot hole. Now you need Read More …